|
Contact Shax Engineering
|
800.814.3680
408.452.1500 |
 |
|
|
|
Services | PCB
Fabrication
|
Shax Engineering manufacturing complex and technologically advanced multi-layer, quick turn prototyping and New Product Introduction (NPI) printed circuit boards.
PCB boards are produced to meet your requirements for
specification and delivery time. We have established manufacturing process that support a seamless transition to volume production
and we
determined to drive
down your fabrication cost.
PCB Fabrication
Services
-
Quick
Turnaround: 1 to 3 Days Based on Complexity
-
Rigid and
Flex Boards
-
Prototypes
Production Quantities
-
Gerber
to CAD Netlist Comparison
-
Prototype to Production Quantities
-
Net List Testing: Flying Probe
-
Engineering Support Services
-
Design Rule Check
-
Layer Stack-Up and Special Materials
Consulting
|
Technology
-
Altra High Density
-
Mother
Board Design
-
High Speed
Backplane
-
High
Density Interconnect
-
RF & Microwave
-
Signal Integrity
-
DFM Analysis
-
Evaluation & Reference Board
-
ATE / Burn in Boards Gerber Files
-
Thermal
Management
|
Capabilities |
|
2 to 30 Layers. |
 |
Layers Stack-up Generation |
|
|
Trace width down to 4 mils, Spacing down
to 4 mils |
|
|
Base Materials and High
Temperature FR4, Getek, Nelco 4000-13, Nelco 6000,
Polyimide, BT, Cynate Ester, Rogers 4000 Series, Rogers
3010, Rogers 5880 |
|
BGA, Micro BGA, SMT, PTH and Edge Plating |
| Selective Plating Finishes including
electroless Nickel/Immersion Gold, HASL, Organic OSP,
Hard & Soft Gold, Immersion Silver |
| Solder Mask including LPI (Most
Colors), Dry Film, SR1000 |
| Composite High Speed
Materials (Teflon)/FR4 Combined material |
|
|
|
|
