Home > Services > PCB Fabrication

PCB Fabrication

Shax Engineering manufacturing complex and technologically advanced multi-layer, quick turn prototyping and New Product Introduction (NPI) printed circuit boards. PCB boards are produced to meet your requirements for specification and delivery time. We have established manufacturing process that support a seamless transition to volume production and we determined to drive down your fabrication cost.

PCB Fabrication Services Quick Turnaround: 1 to 3 Days Based on Complexity Rigid and Flex Boards Prototypes Production Quantities Gerber to CAD Netlist Comparison Prototype to Production Quantities Net List Testing: Flying Probe Engineering Support Services Design Rule Check Layer Stack-Up and Special Materials Consulting	Technology Altra High Density Mother Board Design High Speed Backplane High Density Interconnect RF & Microwave Signal Integrity DFM Analysis Evaluation & Reference Board ATE / Burn in Boards Gerber Files Thermal Management
Capabilities

	2 to 30 Layers.
	Layers Stack-up Generation
	Trace width down to 4 mils, Spacing down to 4 mils
	Base Materials and High Temperature FR4, Getek, Nelco 4000-13, Nelco 6000, Polyimide, BT, Cynate Ester, Rogers 4000 Series, Rogers 3010, Rogers 5880
	BGA, Micro BGA, SMT, PTH and Edge Plating
	Selective Plating Finishes including electroless Nickel/Immersion Gold, HASL, Organic OSP, Hard & Soft Gold, Immersion Silver
	Solder Mask including LPI (Most Colors), Dry Film, SR1000
	Composite High Speed Materials (Teflon)/FR4 Combined material
	Workmanship that meets industry standards including IPC-2221 and IPC-2222.